Millers Oils XF Premium C2 0W-30

Millers Oils XF Premium C2 0W-30 is a fully synthetic mid SAPS engine oil with Dynamic Fluid Technology, meeting ACEA C2, API SP and PSA B71-2312 for Fiat and PSA group applications including Peugeot, Citroen and DS.

This product is currently out of stock and unavailable.

SKU: ML-XF-C2-0W30-PA Category: Brand:

Millers Oils XF Premium C2 0W-30

Millers Oils XF Premium C2 0W-30 is a fully synthetic, mid SAPS engine oil for petrol, diesel and hybrid applications. It is formulated for original equipment applications requiring a C2 0W-30 viscosity, predominantly Fiat and PSA group vehicles including Peugeot, Citroen and DS.

XF Premium is the top tier of the Millers Oils passenger car range and the differentiator is Dynamic Fluid Technology. DFT is engineered to deliver enhanced low temperature flow at cold start, so vital components are protected from the very start of every journey, and to hold engine cleanliness over a long interval, which is what underpins improved fuel economy, reduced emissions and extended service drain capability.

ACEA C2 is a fuel economy category. It permits a lower high temperature high shear viscosity than C3, which reduces internal friction and is where the efficiency gain comes from, while still restricting sulphated ash, phosphorus and sulphur to protect aftertreatment hardware. That lower HTHS floor is also why C2 and C3 are not freely interchangeable: an engine specified for C2 is built around the thinner film, and one specified for C3 is not.

The mid SAPS chemistry works with the aftertreatment rather than against it, protecting particulate filters, Selective Catalytic Reduction systems and AdBlue dosing. DFT also delivers low speed pre-ignition protection and turbocharger care under extreme operating conditions, and the oil is specifically formulated for use in hybrid systems including self-charging hybrids and plug-in hybrids, where the engine runs in short bursts and spends more of its life at part temperature.

The performance profile is ACEA C2, API SP and PSA B71-2312. It is suitable for BMW Longlife-12 FE, Chrysler MS-90047 and MS-13340, Fiat 9.55535-DS1 and 9.55535-GS1, and Asian manufacturers where an ACEA C2 oil is recommended.

Typical characteristics are a density of 0.846 g/ml at 15°C, a kinematic viscosity of 9.6 cSt at 100°C and a flashpoint above 200°C.

Available from Velocity Edge in 10x1L, 4x5L, 20L drum, 199L barrel and 1000L IBC.

Weight N/A
Pack Size

10x1L, 199L, 20L, 4x5L, IBC

Viscosity

SAE J300 0W-30

Base Oil

Fully Synthetic

Range

Fully Synthetic Mid SAPS Engine Oil