Shell AeroShell Oil 80

Shell AeroShell Oil 80 is a straight mineral SAE 40 aircraft piston engine oil engineered to deliver reliable break-in performance, high viscosity stability and clean lubrication in four-stroke aviation engines requiring non-dispersant oils.

Add to Quote
SKU: SH-AS-OIL80-PA Category: Brand:

Shell AeroShell Oil 80

Shell AeroShell Oil 80 is a straight mineral lubricating oil specifically developed for aircraft piston engines. It is blended from selected high viscosity index base stocks and contains no additives other than a small quantity of antioxidant and, where required, a pour point depressant to improve low-temperature fluidity. As a non-dispersant oil, it is particularly suited to specific operational requirements and engine break-in procedures.

The oil corresponds to SAE 40 viscosity grade under SAE J1966 (which replaces MIL-L-6082E) and is one of four viscosity grades available within the AeroShell straight mineral oil range, alongside AeroShell Oils 65, 100 and 120. The grade number reflects the viscosity at 210°F measured in Saybolt Universal Seconds.

Shell AeroShell Oil 80 is approved for use in four-stroke cycle (four-cycle) certified aircraft reciprocating piston engines, except Porsche engines, and in other aircraft radial engines that require oil meeting SAE J1966 (MIL-L-6082) and do not require a dispersant additive. It is used primarily during the break-in period of most new or recently overhauled four-stroke aviation piston engines. Since break-in duration and lubrication recommendations vary, operators should always refer to the original engine manufacturer or overhaul facility for specific guidance.

Typical physical characteristics demonstrate stable high-temperature viscosity, with kinematic viscosity at 100°C within SAE 40 limits, and a viscosity index exceeding minimum specification requirements. The oil offers a low pour point for improved cold weather handling and a flash point above 225°C, supporting safe operation at elevated temperatures. Low sulphur and ash content, controlled total acid number and successful copper corrosion and trace sediment testing confirm its suitability for aviation engine use.

Shell AeroShell Oil 80 also meets Russian MS-14 specification and carries Joint Service Designation OM-170. Its straightforward mineral formulation makes it particularly appropriate

Weight N/A
Pack Size

6x1AQ

Viscosity

SAE J300 80

Base Oil

Mineral

Range

Aviation Piston Engine Oil