Millers Oils XF Premium C2 ECO 0W-30

Millers Oils XF Premium C2 ECO 0W-30 is a fully synthetic mid SAPS engine oil meeting ACEA C2 and Ford WSS-M2C950-A, carrying Jaguar Land Rover STJLR.03.5007 OEM Acknowledgement, for Ford and JLR applications.

This product is currently out of stock and unavailable.

SKU: ML-XF-C2-ECO-0W30-PA Category: Brand:

Millers Oils XF Premium C2 ECO 0W-30

Millers Oils XF Premium C2 ECO 0W-30 is a fully synthetic, mid SAPS engine oil for petrol, diesel and hybrid applications, formulated for original equipment applications requiring a C2 0W-30 viscosity, predominantly Ford and Jaguar Land Rover.

This grade sits alongside XF Premium C2 0W-30 but points at a different half of the market. Where the standard C2 0W-30 is built around Fiat and PSA requirements, the ECO version answers Ford WSS-M2C950-A and carries a Jaguar Land Rover STJLR.03.5007 OEM Acknowledgement. Worth being precise about that wording: an acknowledgement is the manufacturer confirming the oil meets their requirement, which is a step short of a full approval, and we would rather state it accurately than overclaim.

Dynamic Fluid Technology is the engineering behind the XF Premium range. It provides enhanced low temperature flow when cold starting, so the engine is protected from the first revolution, and it maximises viscosity stability at high temperature. That stability is what reduces wear on pistons, rings, the timing chain, bearings and valve lifters once the oil is hot and the film is working hardest.

The mid SAPS formulation protects particulate filters, Selective Catalytic Reduction systems and AdBlue dosing, giving soot control without loading the aftertreatment with ash. DFT also enhances engine cleanliness, which is what delivers the fuel economy, lower emissions and extended service drain capability the ECO name points at, and the oil is formulated for use in all hybrid systems including self-charging and plug-in hybrid electric vehicles.

The performance profile is ACEA C2, Ford WSS-M2C950-A and Jaguar Land Rover STJLR.03.5007 as an OEM Acknowledgement. It is suitable for API SN and Asian manufacturers where an ACEA C2 oil is recommended.

Typical characteristics are a density of 0.845 g/ml at 15°C, a kinematic viscosity of 9.7 cSt at 100°C and a flashpoint above 200°C.

Available from Velocity Edge in 10x1L, 4x5L, 20L drum, 199L barrel and 1000L IBC.

Weight N/A
Pack Size

10x1L, 199L, 20L, 4x5L, IBC

Viscosity

SAE J300 0W-30

Base Oil

Fully Synthetic

Range

Fully Synthetic Mid SAPS Engine Oil