Shell Gadus S1 V220 2
Shell Gadus S1 V220 2 is a multipurpose lithium-based extreme pressure grease designed for general lubrication in moderate-duty industrial and engineering applications. Formulated using mineral base oils and a lithium soap thickener, the grease provides reliable lubrication performance where operating conditions are not highly demanding but still require effective protection against wear and contamination.
A key benefit of Shell Gadus S1 V220 2 is its dependable extreme pressure performance. The grease contains additives that provide fair protection against wear when components are subjected to moderate loads and mechanical stress. This protection helps maintain lubrication films between moving metal surfaces, reducing friction and limiting the risk of premature component wear in plain and rolling element bearings.
The grease also demonstrates good mechanical stability, which helps it maintain consistency during operation. In many industrial environments, vibration and mechanical movement can cause some greases to soften and leak from bearings. Shell Gadus S1 V220 2 resists this softening effect, helping the grease remain in place and continue providing reliable lubrication over extended service periods.
Resistance to water wash-out is another important feature of the product. Equipment operating in sectors such as steel production, cement manufacturing and general engineering may be exposed to water or moisture contamination. Shell Gadus S1 V220 2 provides good resistance to water wash-out, helping the grease maintain lubrication performance even when equipment is exposed to wet operating conditions.
The formulation also provides corrosion protection for metal surfaces. The grease contains additives that help protect bearing components from corrosion and oxidation, which can occur when equipment is exposed to moisture or environmental contaminants. By protecting metal surfaces and maintaining a stable lubricating film, the grease helps extend component service life and maintain consistent operating performance.
Shell Gadus S1 V220 2 is recommended for general lubrication of moderate-duty plain and rolling element bearings operating with poor sealing or exposed to external contaminants. It is commonly used in industries such as steel manufacturing, cement production and general engineering, where equipment operates under moderate loads and requires dependable multipurpose grease lubrication.
Typical physical characteristics include NLGI grade 2 consistency, lithium soap thickener and mineral base oil. The grease has a base oil viscosity of approximately 220 mm²/s at 40°C and 18 mm²/s at 100°C. Worked cone penetration is typically 265–295 (0.1 mm) and the dropping point is greater than 180°C, supporting reliable lubrication performance within the recommended operating temperature range of approximately –10°C to +110°C.
