Millers Oils XF Premium ECO 5W-30
Millers Oils XF Premium ECO 5W-30 is a fully synthetic, full SAPS engine oil for petrol and diesel engines including hybrid applications, formulated for original equipment applications requiring a 5W-30 viscosity, predominantly Ford, Jaguar Land Rover and Asian manufacturers.
This is the one product in the XF Premium 5W-30 group that is full SAPS rather than mid or low, and the distinction is the most important thing to understand before ordering it. Full SAPS means no deliberate restriction on sulphated ash, phosphorus and sulphur. On an engine without a diesel particulate filter that is not a problem, and the higher additive levels bring real anti-wear benefit. On a DPF-equipped engine it is the wrong oil, because the ash it leaves behind does not burn off during regeneration.
What it is for is the ACEA A5/B5 requirement, which is a fuel economy category with a reduced high temperature high shear viscosity, built around Ford’s WSS-M2C913 family. Ford WSS-M2C913-D is the current revision and this oil meets it, with backwards suitability to the C, B and A revisions. That makes it a practical single line for a workshop carrying older Ford and Jaguar Land Rover work, where the C-category oils elsewhere in this range would be the wrong specification entirely.
Dynamic Fluid Technology provides enhanced low temperature flow at cold start and maximises viscosity stability at high temperature, reducing wear on pistons, rings, the timing chain, bearings and valve lifters. DFT also enhances engine cleanliness, which delivers the improved fuel economy, reduced emissions and extended service drain capability the ECO name refers to. The oil is formulated for all hybrid systems including self-charging and plug-in hybrids, and is compatible for use with bio fuels.
The performance profile is ACEA A5/B5, API SL, Ford WSS-M2C913-D and Jaguar Land Rover STJLR.03.5003. It is additionally suitable for API CF, ACEA A1/B1, Fiat 9.55535-G1, Ford WSS-M2C913-C, WSS-M2C913-B and WSS-M2C913-A, ILSAC GF-4, Renault RN0700, Dacia, Asian manufacturers, and Volvo VCC 95200377 where a 0W-30 viscosity is recommended, although without the fuel economy benefit of a true 0W-30.
Typical characteristics are a density of 0.847 g/ml at 15°C, a kinematic viscosity of 10.2 cSt at 100°C and a flashpoint above 200°C.
Available from Velocity Edge in 10x1L, 4x5L, 20L drum, 199L barrel and 1000L IBC.




