Mobil Glygoyle 100
Mobil Glygoyle 100 is a high-performance fully synthetic lubricant formulated using polyalkylene glycol (PAG) technology. It is designed for use in gear, bearing and compressor applications operating under severe conditions where conventional mineral oils and many synthetic lubricants may not perform effectively.
One of the key advantages of Mobil Glygoyle 100 is its excellent efficiency performance. The inherently low traction coefficient of PAG base oils helps reduce friction, resulting in improved gear efficiency, lower energy consumption and reduced operating temperatures. This contributes to longer component and lubricant life.
Mobil Glygoyle 100 also offers outstanding wear and micropitting protection. The formulation provides strong EP and anti-wear performance, helping protect gears, bearings and other critical components under heavy loads and severe operating conditions. This improves reliability and reduces maintenance requirements.
Another important benefit is its excellent thermal and oxidation stability. The oil resists degradation and deposit formation at elevated temperatures, helping maintain clean systems and extend oil drain intervals.
Mobil Glygoyle 100 also provides very good corrosion and rust protection, along with excellent foam control. Its low pour point and high viscosity index ensure reliable performance across a wide operating temperature range, supporting smooth start-up and consistent lubrication.
Mobil Glygoyle 100 is recommended for use in worm gear applications, industrial gearing, bearings and gas compressors, particularly in severe service environments such as cement, metalworking, plastics, food processing and textile industries. It is also suitable for filled-for-life gearboxes and applications requiring high efficiency and long lubricant life.
Physical characteristics include a kinematic viscosity of approximately 100 mm²/s at 40°C and 17.3 mm²/s at 100°C, with a viscosity index of around 190. Mobil Glygoyle 100 has a density of approximately 1.079 g/cm³ at 15.6°C, a flash point of approximately 265°C and a pour point of approximately −30°C, supporting reliable performance across a wide range of operating conditions.



