Mobil Pegasus 610 Ultra
Mobil Pegasus 610 Ultra is a high performance gas engine oil primarily intended for the lubrication of modern medium and high speed four-cycle engines operating on landfill, biomass or other fuel gases containing corrosive materials such as hydrogen sulphide or halogens. The product is specifically developed for aggressive gas conditions where high levels of hydrogen sulphide and siloxanes can significantly reduce oil life and increase wear on engine components.
Mobil Pegasus 610 Ultra is formulated as a high Total Base Number gas engine oil with exceptional reserve alkalinity designed to offset the negative effects of corrosive combustion by-products. This helps protect valve seats, valve faces and upper cylinder components while reducing corrosion and wear. The formulation also delivers excellent anti-wear and anti-scuff performance to minimise piston scuffing, scoring and cylinder and ring wear in highly loaded gas engines.
One of the key advantages of Mobil Pegasus 610 Ultra is its ability to perform in highly contaminated fuel environments. The oil provides additional protection in applications where high deposit formation, piston scuffing and short oil drain intervals are common. Its strong wear protection helps reduce liner scuffing, extend overhaul periods and support longer operating life for critical engine components.
Mobil Pegasus 610 Ultra also provides excellent oxidation and chemical stability. These properties help maintain cleaner engines, extend oil drain intervals even when operating with highly contaminated fuels and reduce oil filter costs. The formulation also provides resistance to oxidation and nitration, helping maintain viscosity control and performance throughout service life.
The product offers effective corrosion protection and detergent and dispersant performance. These characteristics help neutralise acids, protect upper cylinder and valve train components and maintain engine cleanliness. This contributes to improved reliability, reduced maintenance requirements and consistent engine performance.
Mobil Pegasus 610 Ultra is recommended for gas engines operating on fuels containing moderate to high levels of hydrogen sulphide and high levels of siloxanes. It is also suitable for engines operating on other corrosive gases, reciprocating compressors handling contaminated gas and high output engines operating at or above rated capacity under high temperature conditions.
Physical characteristics include a kinematic viscosity of approximately 12.9 mm²/s at 100°C, with a viscosity index of around 107. Mobil Pegasus 610 Ultra has a density of approximately 0.875 g/ml at 15.6°C, a flash point of approximately 259°C, a pour point of approximately −30°C, sulphated ash of 1.0% and a base number of approximately 10.3 mg KOH/g.



